Pea starch exhibits good expansion characteristics under relatively lower temperatures during extrusion cooking.

Abstract

Extrusion processing characteristics of pea starch were studied as impacted by various extrusion cooking processing variables, including, moisture content (15%, 17.5%, and 20% w.b.), temperature (120, 135, and 150 °C), and screw speed (150, 200, and 250rpm), in a co-rotating twin-screw extruder. Physicochemical properties such as radial expansion ratio (ER), unit density (UD), water absorption index (WAI), and water solubility index (WSI) were measured. ER of the extrudates ranged between 2.52 and 3.63. These values of ER were significantly high, although relatively lower compared to the highest values reported in the literature for corn and rice extrudates. The UD values for all the extrudates ranged from 0.12 to 0.35g/cm3 , WAI, and WSI values ranged from 10.98 to 12.10g/g and from 0.12% to 7.73%, respectively. Both screw speed and moisture content had significant impacts on the ER (P <0.01). The highest ER was observed for the extrusion cooking conditions of the lowest moisture content level (15%), lowest barrel temperature (120 °C), and lowest screw speed (150rpm). The cross-sectional microstructure of the extrudates showed that the samples with a high ER had thick and elongated pores. The results of this study indicate that pea starch is a viable ingredient for making puffed extruded products. PRACTICAL APPLICATION: The food industry can utilize the information generated from this study in the development of extruded expanded food products with pea starch. The specific information related to process conditions can assist the food industry in determining the ideal conditions for extrusion cooking in the production.