Particulate characteristics of low-temperature combustion (PCCI and RCCI) strategies in single cylinder research engine for developing sustainable and cleaner transportation solution

Abstract

In this experimental study, particulate matter (PM) characterizations of different low-temperature combustion (LTC) strategies have been compared with conventional compression ignition (CI) combustion for finding out a sustainable and cleaner transport solution. LTC strategies included premixed charge compression ignition (PCCI) and reactivity-controlled compression ignition (RCCI) combustion. Particulate sampling and characterization were carried out in a single-cylinder diesel engine. All engine tests were performed at 1, 2, 3, 4 bar brake mean effective pressure (BMEP) at 1500 rpm. CI and PCCI combustion experiments were performed using mineral diesel as the test fuel. However, mineral diesel and methanol were used as high reactivity fuel (HRF) and low reactivity fuel (LRF), respectively in the RCCI combustion strategy. For all combustion strategies, fuel injection pressure (FIP) was kept constant at 500 bar. However, the number of injections and start of injection (SoI) timings were varied to optimize the engine performance. Results showed that the RCCI combustion strategy emitted a relatively lower concentration of particles than the other two strategies (PCCI and CI). A relatively higher number concentration of accumulation mode particles (AMP) compared to nucleation mode particles (NMP) in the exhaust of the RCCI combustion strategy was an important finding of this study. Number-size and mass-size distributions of particles emitted from different strategies also exhibited the dominant concentration of particles in the CI combustion strategy. PM bound trace metal analysis was yet another critical aspect of this study, which showed that both RCCI and PCCI strategies emitted a relatively lower concentration of trace metals than the conventional CI combustion strategy. Parametric analysis of different PM characteristics and NOx-PM trade-off analysis also demonstrated the importance of LTC strategies over the conventional CI combustion strategy. Overall, this study demonstrated that all LTC strategies could be used for PM and NOx reduction; however, the RCCI combustion strategy was more dominant in NOx and PM reduction, in addition to having an excellent capability of using alternative fuel in the quest for developing sustainable transport solution.