Abstract
The effect of hybrid infrared-convective (IRC), microwave (MIC) and infrared-convective-microwave (IRCM) drying methods on thermodynamic (drying kinetics, effective moisture diffusivity coefficient (Deff), specific energy consumption (SEC)) and quality (head rice yield (HRY), color value and lightness) characteristics of parboiled rice samples were investigated in this study. Experimental data were fitted into empirical drying models to explain moisture ratio (MR) variations during drying. The Artificial Neural Network (ANN) method was applied to predict MR. The IRCM method provided shorter drying time (reduce percentage = 71%) than IRC (41%) and microwave (69%) methods. The Deff of MIC drying (6.85 × 10−11–4.32 × 10−10 m2/s) was found to be more than the observed in IRC (1.32 × 10−10–1.87 × 10−10 m2/s) and IRCM methods (1.58 × 10−11–2.31 × 10−11 m2/s). SEC decreased during drying. Microwave drying had the lowest SEC (0.457 MJ/kg) compared to other drying methods (with mean 28 MJ/kg). Aghbashlo’s model was found to be the best for MR prediction. According to the ANN results, the highest determination coefficient (R2) values for MR prediction in IRC, IRCM and MIC drying methods were 0.9993, 0.9995 and 0.9990, respectively. The HRY (from 60.2 to 74.07%) and the color value (from 18.08 to 19.63) increased with the drying process severity, thereby decreasing the lightness (from 57.74 to 62.17). The results of this research can be recommended for the selection of the best dryer for parboiled paddy. Best drying conditions in the study is related to the lowest dryer SEC and sample color value and the highest HRY and sample lightness.
Highlights
Rice (Oryza sativa L.) is the major food for over half of the world’s population
The aim of this study was to analyze the effect of various techniques of drying on thermodynamic and quality (HRY, color value and lightness) properties of parboiled samples
The results showed that drying time decreased (72–22 min) when MIC power increased
Summary
Rice (Oryza sativa L.) is the major food for over half of the world’s population. Fajr is the most consumed and exported rice variety in Iran, it has a low milling efficiency. The parboiling process is the hydrothermal treatment of paddies before milling and involves three basic stages: soaking, steaming, and drying [1]. Have been applied for drying parboiled rice [2]. Hot air (HA) drying is an easy and conventional method for drying food materials. It has the limitations of longer drying time and low energy conversion efficiency [3]. Infrared (IR) and microwave (MIC) drying methods ensure rapid and efficient distribution of heat throughout the material. The advantages of these methods are energy efficiency, and short drying time [4]
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have