Abstract
Bamboo fabric is subjected to solvent treatment with 3-mercaptopropyltrimethoxysilane (MPTS) before metal deposition. Raman and IR analyses indicate that MPTS is successfully grafted on the fabric. Copper is deposited on the pretreated fabric by a palladium-free catalytic electroless process, and then copper/bamboo fabric (Cu/BF) composite is obtained. SEM (scanning electron microscopy) observation reveals that copper is uniformly covered on the fabric. Chemical composition and crystal structure of the composite are detected by EDX (energy-dispersive X-ray analysis), XPS (X-ray photoelectron spectroscopy) and XRD (X-ray diffraction) measurements, peaks for Cu0 are found in these patterns. The water absorption ratio for the title composite is about 162% by immersion in water, or 8.9% by putting in an environmental condition (humidity of 65±2%). The Cu/BF composite is firm and can pass a Scotch®-tape peel adhesion test. The electromagnetic interference (EMI) shielding effectiveness (SE) of the composite (copper on fabric: 39g/m2) is more than 48dB at frequency ranging from 0.2 to1000MHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
