Abstract
There is a consensus that savings of 1.0-1.4% of a country's gross domestic product may be achieved through lubrication R&D. Recent studies have shown great potential for using surface-functionalized nanoparticles (NPs) as lubricant additives to enhance lubricating performance. NPs were reported with ability of producing a low-friction antiwear tribofilm, usually 20-200 nm in thickness, on the contact surface. In contrast,this study reports an unexpected 10 times thicker (2-3 μm) tribofilm formed by dodecanethiol-modified palladium NPs (core size: 2-4 nm) in boundary lubrication of a steel-cast iron contact. Adding 0.5-1.0 wt % suchNPs to a lubricating oil resulted in significant reductions in friction and wear by up to 40 and 97%, respectively. Further investigation suggested that the PdNP core primarily was responsible for the improvement in both friction and wear, whereas the thiolate ligand only contributed to the wear protection but hadlittle impact on the friction behavior. In addition, unlike most previously reported tribofilms that contain a substantial amount of metal oxides, this PdNP-induced tribofilm is clearly dominated by Pd/S compounds, as revealed by nanostructural examination and chemical analysis. Such a ultrathick tribofilm with unique composition is believed to be responsible for the superior lubricating behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.