Abstract
Recently, the use of transition metal oxide electrodes for supercapacitor applications has increased due to the possibility of variable mixed valence states. The present study has established the use of Pd-Cr2O3 composite thin films as a working electrode for high-performance supercapacitors. The reactive dc magnetron co-sputtering method has been used for the fabrication of thin film of Cr2O3 and Pd-Cr2O3 on SS-304 substrate. X-ray diffraction and X-ray photoemission spectroscopy techniques were used to examine the surface chemistry and phase purity of chromium oxide and Pd-Cr2O3 composite thin films. The incorporation of Pd in Cr2O3 delivers a drastic change in the surface morphology. Due to the modified morphology and electronic properties, a noticeable improvement in the electrochemical properties of Pd-Cr2O3 electrode is observed. The obtained value of specific capacitance for this electrode is 401 Fg−1 at 0.1 mAcm−2 scan rate and within the potential window range 0 to +1.2 V. This value of specific capacitance is almost twice in comparison to the Cr2O3 based electrode. The Pd-Cr2O3 composite thin film shows a good cycle retention capability of 8000 cycles with 87.5 % retention. The obtained value of energy density and power density for Pd-Cr2O3 electrode was 80.2 Whkg−1 and 3.23 kWkg−1, respectively at 0.1 mAcm−2. Consequently, this composite material electrode can be seen as a promising advancement for electrodes in supercapacitor devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.