Packing optimization and design of the deployable parabolic rigid antenna based on origami

Abstract

This paper introduces a novel approach for optimizing the packing and design of deployable parabolic rigid antenna structures based on origami, tailored to meet specific requirements related to the number of solid-surface blocks and the size of the folded antenna. The study begins by selecting a single-vertex four-crease configuration with one degree of freedom from the origami pattern, guided by mobility analysis, to optimize block arrangement. Subsequently, a planar model is employed to qualitatively examine the impact of geometric parameters on the stowage efficiency of the antenna. Building upon the insights gained from the planar model, an optimization framework for the parabolic rigid deployable antenna structure is established. The objective function of the optimization is the stowage volume, while simultaneously adhering to stiffness, collision, and mobility constraints. The design parameters of the antenna structure are thoroughly analyzed. To mitigate collision risks during folding, design considerations are applied to placement of support nodes, location of rotating axes, and block division, leveraging the optimized parameters. The practicality of the proposed method is successfully demonstrated through the folding of a simulated 3D model and of a physical 3D printed model. These tangible representations show the feasibility of the presented approach, affirming its potential applicability in the optimization and design of deployable parabolic rigid antenna structures.