Abstract
A novel film preparation method utilizing polymer suspension, entitled adsorbing deposition in suspensions (ADS), has been proposed. The poly(3-hexylthiophene) (P3HT) toluene solution forms P3HT nanofibrils dispersed suspension by aging. P3HT nanofibrils are highly crystallized with sharp vibronic absorption spectra. By the ADS method, only P3HT nanofibrils in suspension can be deposited on the substrate surface without any disordered fraction from the dissolved P3HT in suspension. Formed ADS film contains only the nanostructured conjugated polymer. Fabricated polymer thin-film transistor (TFT) utilizing ADS P3HT film shows good TFT performances with low off current, narrow subthreshold swing and large on/off current ratio.
Highlights
The advantages of easy fabrication, low-cost, and compatibility with flexible and lightweight plastic substrates have promoted the development of many promising π-conjugated polymers.Spin-coating method is widely used for preparing large-area uniform film, which tends to have quite low material efficiency due to blowing off the liquids during spinning
Electrophoretic deposition (EPD), which is an industrial process for colloidal particles deposition onto electrodes in suspensions, is one of the preparation methods with high materials efficiency [1]
We previously proposed the dielectric barrier electrophoretic deposition (DBEPD) for solving such problems because the electrodes and substrates are separated by intervening dielectric layers with high electric impedance [6]
Summary
Spin-coating method is widely used for preparing large-area uniform film, which tends to have quite low material efficiency due to blowing off the liquids during spinning. This is one of the critical issues to be solved on the commercialization and cost reductions of solution-processable organic devices fabrications. Electrophoretic deposition (EPD), which is an industrial process for colloidal particles deposition onto electrodes in suspensions, is one of the preparation methods with high materials efficiency [1]. Usage of polymer suspension has some advantages such as needless solubility and high material efficiency. EPD systems cannot avoid electrochemical reaction due to the physical contact between electrodes and solvent, or Joule heating due to the application of high voltage
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
