Abstract
In this paper, pixel circuit design method using low‐temperature poly‐silicon and oxides (LTPO) thin film transistors (TFTs) for active‐matrix organic light‐emitting diode (AMOLED) are derived in detail. Through calculation and SPICE simulation of a typical 7TFT‐1C LTPO pixel circuit, the optimum value for the capacitor is selected as 0.1 pF for accurate VTH compensation and high resolution above 490 pixels per inch (PPI). Moreover, to reduce the relative current error rate to 3 %, the maximum allowable threshold voltage shift is limited within −0.98 V and 0.44 V for IGZO TFT, and within −0.3 V to 0.31 V for the driving TFT (LTPS). This research provides guidelines for AMOLED display development using LTPO TFTs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.