Abstract

Oxidative dehydrogenation of ethane and isobutane was investigated using chromium–vanadium–niobium mixed oxide catalysts with different compositions (Cr 0.63V 0.27Nb 0.1, Cr 0.67V 0.24Nb 0.09, Cr 0.71V 0.21Nb 0.08, Cr 0.74V 0.19Nb 0.07, Cr 0.78V 0.16Nb 0.06). In the oxidative dehydrogenation of isobutane to isobutylene, selectivity and yield values reaching to 0.9 and 0.4, respectively, were obtained at a fractional conversion level of 0.45 with Cr 0.74V 0.19Nb 0.07 catalyst at 573 °C. Decrease of chromium content of the catalyst caused a decrease in both selectivity and activity. CH 4 formation was found to cause a decrease in ethylene selectivity in the oxidative dehydrogenation of ethane. At 570 °C and with an O 2/C 2H 6 feed ratio of 0.5, ethylene and methane selectivity values of about 0.2 and 0.5 were obtained, respectively, at a conversion level of 0.3 over Cr 0.74V 0.19Nb 0.07 catalyst. DRIFTS studies carried out at reaction conditions indicated the presence of OH stretchings and ethyl, vinyl and formyl species on the surface in the oxidative dehydrogenation of ethane. Following the DRIFTS results, reaction mechanisms were proposed for the oxidative dehydrogenation of ethane and isobutane.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.