Oxidation of sulphide in abandoned mine tailings by ferrate

Abstract

In this study, Fe(VI) was applied to treat three mine tailings containing different amounts of sulphides and heavy metals. Oxidation of sulphides by Fe(VI) was studied at pH 9.2 with variation of solid to solution ratio, Fe(VI) concentration and injection number of Fe(VI) solution. The major dissolved products from the treatment of mine tailings with Fe(VI) solution were sulphate and arsenic. Oxidation efficiency of sulphides was evaluated by reduction efficiency of Fe(VI) as well as by measurement of dissolved sulphate concentration. Even though inorganic composition of three mine tailings was different, reduction fraction of Fe(VI) was quite similar. This result can suggest that Fe(VI) was involved in several other reactions in addition to oxidation of sulphides. Oxidation of sulphides in mine tailing was greatly dependent on the total amount of sulphides as well as kinds of sulphides complexed with metals. Over the five consecutive injections of Fe(VI) solution, dissolved sulphate concentration was greatly decreased by each injection and no more dissolved sulphate was observed at the fifth injection. While dissolved arsenic was decreased lineally up to the fifth injection. Sulphate generation was slightly increased for all mine tailings as Fe(VI) concentration was increased; however, enhancement of oxidation efficiency of sulphides was not directly proportional to the initial Fe(VI) concentration.