Abstract

The degradation of tebuconazole (TEB) by UV/H2O2, UV/NaClO, and ozonation was investigated in this research. The experimental findings unveiled that under the specified conditions, the degradation percentages of TEB were raised to 99% within 40 s, 5 min, and 3 min for UV/H2O2, UV/NaClO and ozonation, respectively. The mineralization percentages within 1 h were 59%, 31% and 8% for the three AOPs. UV/H2O2 and UV/NaClO technologies mainly acted through OH·, while O3 treatment primarily relied on the free radicals such as 1O2 and O2·-. UV-based AOPs achieved almost complete dechlorination within 1 h, whereas O3 treatment had a less effective dechlorination, reaching only 27.61%. Notably, UV alone achieved a dechlorination percentage of 43.07%. By identifying the TPs, we found that the three AOPs shared three similar degradation pathways. The degradation mechanism of TEB mainly entailed the removal of the benzene ring, tert-butyl group and triazolyl group. Toxicity assessment revealed an initial increase followed by a gradual decrease in toxicity for UV/NaClO and O3 treatments, whereas UV/H2O2 treatment exhibited a sustained decrease. This was due to the presence of TP278 and TP303 by UV/NaClO and TP168 and TP153 by ozonation. After estimating the costs of the three AOPs, UV/H2O2 standed out as the best choice for achieving a 90% degradation percentage and exhibiting lower toxicity performance, while O3 treatment was favored for low TOC demands. These research findings provided valuable reference for understanding the degradation mechanism and developing a new technology of the removal of TEB.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call