Output-only damage detection using vehicle-induced displacement response and mode shape curvature index

Abstract

Most of the existing bridge superstructure damage detection methods are based on acceleration or strain response due to ambient excitation. This paper proposes a bridge damage detection procedure that utilizes vehicle-induced displacement response without requiring prior knowledge about the traffic excitation and road surface roughness. This study is partially motivated by the recent advances in convenient measurement of structural displacements enabled by video-based sensors. Vehicle–bridge interaction analysis shows that when subjected to moving vehicles, the bridge displacement response is dominated by the first-order mode component. This justifies the proposed damage detection method that only requires the first-order mode shape curvature. While conventionally the mode shapes are extracted based on operational modal analysis, the first-order mode shape is extracted by directly analyzing the power spectral density functions of measured bridge displacement responses under vehicle excitations. Numerical simulations are carried out to investigate the feasibility and performance of the proposed damage detection method using three damage scenarios including damage at single, double, and multiple locations, each involving several extents of damage defined by the reduction in element stiffness. The results reveal that all the damage cases can be successfully identified. Furthermore, the damage detection performance is evaluated for cases involving different classes of road surface roughness and less measurement points. The study demonstrates the potential of the proposed model-free and time-efficient method for damage detection of bridge structures. Copyright © 2016 John Wiley & Sons, Ltd.