Abstract
Based on the principle of the Villari effect, a force sensor with a giant magnetostrictive material (GMM) as the sensitive element, high linearity, and a large range was studied. A Hall element integrated into the structure was used to detect the magnetic flux density and measure the external force. First, the finite element method was used to verify the validity of the intended magnetization process. Second, an equation for GMM magnetization was derived based on the Jiles–Atherton (J–A) model and the magneto-mechanical coupling effect. The relationships between magnetization and the biased magnetic field, and magnetization and the external force were analyzed under the dynamic coupling model of positive and negative effects. Finally, the influences of various biased magnetic fields and external forces on the sensor output characteristics were determined experimentally. The sensitivity of the designed force sensor was 0.337 mV/N when the bias current was 1.2 A and the preload was 120 N. When a force of 1000 N was applied, the linearity was 0.82%. The experimental results are consistent with the theoretical design values. These research results aid in the development of a highly linear, large-range force sensor. This study provides the theoretical and technical foundations for a high-performance force sensor that can be used in industrial testing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have