Abstract
Solar air heating systems are continuously being improved by combining them with other energy conversion technologies. In this paper, outdoor tests were carried out on a thermoelectric heat-pumping solar air heater (TE-SAH), with four (04) TECs (TEC1–12706) attached to the backside of the absorber plate, and powered by a 40Wp mono-Si PV module to pump heat from the absorber plate into the heated air. The thermal energy production, energy efficiency, heat loss coefficients, and heat removal factor were evaluated and compared with a reference system without TECs. The heat collection and energy efficiency of the solar air heater were improved by 7.14 % and 66.71 %, respectively, with the integration of TECs. Heat losses also decreased by 0.46 MJ. Furthermore, the estimated heat removal factor for the TE-SAH was 0.55, higher than 0.49 obtained for the reference SAH. These results showed that PV-TE heat-pumping is a viable means of improving the thermal performance of solar air heaters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
