Out-of-Plane Dynamical Strength of Masonry Walls Under Seismic Actions

Abstract

ABSTRACT The dynamic analysis of the out-of-plane response of masonry walls, with different reinforcing systems and hit by sequences of pulses alternating in sign, representative of the seismic action, is the aim of the paper. The analysis is done in the context of the Heyman model of the no tension masonry structures. We consider the wall of the last story of a simple masonry house, commonly reinforced at its head by a ring beam, usually in a reinforced concrete. It has also been considered the retrofitting of the wall by applying, on both its sides, vertical bands in FRP, or similar. The dynamics of the wall, activated by sequences of pulses, is analyzed in detail, considering the change of geometry occurring in the mechanism during the motion. The corresponding differential equation is integrated in a closed form. It is shown that, under the alternating sequence of shocks, the dynamical collapse of the wall takes place immediately after the occurrence of an accumulation of out-of-plane deformation of the wall that drags it into the configuration of zero strength, where any resistance, due to the weight, has been lost. The collapse takes place right after when the subsequent incoming pulse pushes the wall to go further beyond this configuration. The check of the seismic safety of the masonry wall concludes the paper. The smallest limit static strength of the wall required in order the wall, having pulsation p, could be able to sustain, at the limit of the dynamical collapse, the action of the asymptotic pulse sequence with acceleration intensity PGA and specific duration p T E /2 of the expected earthquake. It is shown that the wall, reinforced by a top ring beam, with the addition of vertical bands of glass or similar, of suitable length, pasted with lime mortar, can reach the required level of seismic safety.