Orthopedic screws insertion simulation with immediate feedback enhances surgical skill

Abstract

BackgroundScrew insertion to bones is a fundamental skill in orthopedic, spine and cranio-maxillofacial surgery. Applying the correct tightening torque is critical when compressing and fixating bone fragments. Overtightening yields in plastic deformation of the bone and destruction of the screw-bone interface, damaging the construct's stability. The surgeon is required to achieve sufficient hold and compression without stripping the bone. Several studies have investigated these skills, demonstrating much potential to enhance the future surgeons' capabilities. This study presents a novel training module, combining direct tightening followed by deliberate striping with immediate feedback suggested to enhance the surgeon's tactile perception and improve skill. MethodsA prospective single-blinded cohort study was run. Twenty surgeons from various disciplines, excluding orthopedic and maxillo-facial surgeons, were trained using an orthopedic screws insertion model, comprised of synthetic bones. Training sessions considered inserting 40 screws into normal and osteoporotic bone models, experiencing deliberate stripping of the screws and feedback for their performance in three different sessions. FindingsSuccess rate increased between sessions – by 24% to 48% in normal bone, and by 37% to 52% in osteoporotic bone. Stripping rate decreased between sessions – by 37.5% to 18.5% in normal bone, and by 29% to 14% in osteoporotic bone. Average ratio between tightening torque and maximum possible torque before bone stripping improved gradually and consistently from 67.3% to 81.6% in normal bone (p < 0.001), and slightly from 76.4% to 77.5% in osteoporotic bone (p = 0.026). InterpretationImmediate feedback with deliberate stripping and external feedback using a digital torque measuring screwdriver may improve cortical screw insertion technique in the surgeons' community.