Orthogonal wavelet analysis of turbulent wakes behind various bluff bodies

Abstract

The multi-scale structures of turbulent wakes generated by three kinds of bluff body, i.e. circular cylinder, square cylinder and compound of cylinder and square (CS) cylinders, have been experimentally investigated in this paper. Firstly, the instantaneous velocity fields and vorticity were measured by the high-speed PIV technique in a circulating water channel. The instantaneous streamlines and corresponding normalized vorticity contours are obtained at a Reynolds number of 5600. Then one- and two-dimensional wavelet multi-resolution technique was used to analyze the instantaneous velocities and vorticity measured by the high-speed PIV. The turbulence structures were separated into a number of subsets based on their central frequencies, which are linked with the turbulence scales. The instantaneous vorticity and Reynolds shear stresses of various scales were examined and compared between the three generators. It is found that the large-scale turbulent structure makes the largest contribution to the vorticity and Reynolds shear stresses for the three wake generators and exhibits a strong dependence upon the initial conditions or the wake generators. The large-scale vorticity and the sizes of vortex in the circular and square cylinders are larger than those in the CS cylinder wake. The contributions to the Reynolds shear stresses from the large-scale turbulent structures account for 90–96% to the measured maximum Reynolds shear stresses for the three wakes. However, the small-scale structures make less contribution to the vorticity and Reynolds shear stresses.