Abstract
A continuous bubble-column scrubber, capturing CO2 gas for scrubber design purpose by using a NaOH solution under a pH-stat operation, is used to search for optimum parameters for a scrubber design by means of the Taguchi method. The parameters are the pH of the solution, gas-flow rate, liquid-flow rate and temperature, with four levels for each. A total of 16 runs are carried out by using a Taguchi experimental design. From the measured CO2 concentrations at the outlet, the absorption rate and overall mass-transfer coefficient can be determined with the support of a steady-state material balance, as well as a two-film model. According to an S/N ratio analysis, a significance sequence influencing the parameters and optimum conditions can be determined. The results show that the gas-flow rate and pH value are significant parameters, while the temperature and liquid flow rate are minor. A total of four sets of optimum conditions will be used to make further verification. The data determined here were found to be optimum. According to the analysis presented here, a policy for a scrubber design can be established. The results could be used to obtain an algae growth solution for biological carbon fixation in a pilot-scale study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
