Abstract
ABSTRACTLiquid phase analysis dominates the field of blood diagnostics and requires drawing blood volumes of several ml for each test. To achieve acceptable accuracy, each single liquid blood test requires ∼7 mL per blood sample, and repeated blood tests are often needed. Frequent testing ca result in Hospital Acquired Anemia for infants, chronically ill, and critically ill patients. Blood testing methods that can be utilized with small amounts of blood are a critical need to save lives. Theranos claimed to have developed novel methods requiring only a few nL of blood. However, Theranos’ techniques led to errors that exceeded beyond the medically acceptable threshold of 10%. This work investigates solid state blood analysis using low volumes of several µL. The most common blood tests used as first line for diagnostics and monitoring patients’ status, always include blood electrolytes, iron, and in some cases, heavy metals.The present work investigates the formation of rapidly solidified Homogeneous Thin Solid Films (HTSFs) formed from blood drops, in order to make them suitable for solid state analysis in vacuo and in air. The solidification of ∼5 micro-liter (µL)-sized blood droplets into HTSFs is studied with two goals: achieve reproducible HTSFs optimized for producing accurate analysis, and successfully measure the potential accuracy of measurements made on HTSFs for blood electrolytes Na, K, Mg, Ca, and Cl and heavy metals such as Fe.The blood volumes selected for this work are in the µL range, one thousandth volumes drawn for current liquid phase analysis. Balanced Saline Solution (BSS) is used as an initial liquid for testing solidification uniformity and a potential calibration material. Next, canine and human blood are studied on two types of HemaDropTM coatings for solidification: super-hydrophilic and hyper-hydrophilic. HTSF formation from BSS and blood drops are compared on both coated and uncoated surfaces.Three solid state analytical methods are investigated in parallel to probe composition at different depths and test each for reproducibility and accuracy: Ion Beam Analysis (IBA), X-ray Fluorescence (XRF), and X-ray Photoelectron Spectroscopy (XPS). The results show that using solid films of blood yields composition, which can be reproducibly measured by IBA, XPS and XRF to varying degrees. XPS’s depth of analysis, limited to ∼5 nm, probes a small fraction of the HTSF, but provides insights into the range of thickness for homogeneous compositions in HTSFs. Statistical and error analysis help establish whether measurements taken in sets of three typically used in lab fall below the medically accepted error threshold (<10%) for each technique and element detected. Measurements are repeated and taken at various locations and on different HTSFs to establish reproducibility. XRF is of particular interest, because it is fast, accurate, portable and can be conducted in air, making it ideal for areas with limited resources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have