Abstract
A new piezoelectric sensor with a triangular shear structure was designed to conduct the deformation monitoring of geotechnical bodies in mining airspace. Firstly, a three-dimensional sensor model was developed to analyze the impact of structural parameters on resonant frequency and voltage, utilizing both finite element and experimental methods. Secondly, the NSGA-II genetic algorithm was employed to optimize the sensor’s structural parameters, focusing on resonant frequency and voltage, resulting in a Pareto optimal solution set. For the first time, the optimal parameter combination was selected by minimizing the difference method (the height of the mass block was 10.6 mm, the thickness of the piezoelectric plate was 3.29 mm, the height of the piezoelectric plate was 8.1 mm, and the height of the central column was 19 mm). The optimized sensor exhibited a 4.14% increase in resonant frequency and a 9.11% increase in voltage. Finally, the prototype was fabricated, and the effectiveness and feasibility of the design were verified through experiments. The findings indicate the sensor’s promising potential for monitoring geotechnical deformation in mining airspace regions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call