Abstract

Glass fiber reinforced polymer composites are finding its increased applications in variety of engineering applications such as aerospace, automobile, electronics and other industries. However, the users of FRP are facing difficulties to machine it, because of fiber delamination, fiber pull out, short tool life, matrix debonding and formation of powder like chips. The present investigation focuses on the optimization of process parameters for surface roughness of glass fiber reinforced polymer (GFRP) composites using Genetic Algorithm (GA). Experiments are conducted based on the established Taguchi’s L25 orthogonal array in Design of Experiments (DOE) on an all-geared lathe using poly-crystalline diamond (PCD) tool. The process parameters considered were cutting speed, feed, depth of cut, and work piece (fiber orientation angle). A second order mathematical model was developed for surface roughness prediction using Response Surface Methodology (RSM). An attempt has also been made to optimize the surface roughness prediction model coupling with Genetic Algorithm (GA) to optimize the objective function. Validation of the optimized results was also performed by confirmation experiments.Keywords: GFRP composites, Response surface methodology (RSM), Poly crystalline diamond (PCD), surface roughness (Ra), Genetic Algorithm (GA).International Journal of Engineering, Science and Technology Vol. 6, No. 1, 2014, pp. 49-57

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call