Abstract
Naturally replenished biodiesel fuels are more precise in place of diesel engine applications as they have complying thermal properties, which are extensively used by various researchers. However, there is necessity to optimize their utility to meet stringent emission norms as per Bharat Stage VI (BS VI) and Euro 6. From the exhaustive survey on the studies, number of piston grooves (NG), number of grooves-n-bridges on cylinder head (Gr-Br), and inlet valve masking (IVM) using the response surface methodologies (RSM) technique have not been reported on the competence, emissions, and combustion attributes of diesel engines running on Honge oil methyl ester (HOME), hence this is an identified gap in literature. The present simulation work is for optimizing the performance and lessoning exhaust emitted from the diesel prime mover tested on non-conventional and petro fuels. Experimentation was carried out to inquest the competence, combustion, and emittance of a vertical cylinder, overhead valve, water cooling, open or induction swirl diesel engine running on HOME as the injecting fuel. The object of the present effort is to optimize competence of diesel engines via a statistics inquest called designs of experiments (DoE). To curtail the diverse variations to be experimented on, full factorial designs (FFDs) array was employed. The response surface methodologies (RSM)-based nonlinear or quadratic predictors establish the relation between the input parameters and proposed attributes. The RSM-based mathematical predictors are established to prognosticate the distinguished engine output attributes at 95% confidence interval. The response surface assay discovered that a combination of 2B 3G, ‘IVM’ of 90°, and ‘NG’ of six grooves yields highest brake thermal efficiency (BTE), lessoning smoke, carbon monoxide (CO), and hydrocarbon (HC), but nitrogenous oxides (NOx) emissions increased slightly. Additionally, combustion attributes, such as Ignition delay (ID) and combustion duration (CD), were lessoned, but peak pressure (PP) and heat release rate (HRR) had a higher contrast to performance of HOME biodiesel in a conventional CI engine.
Highlights
Introduction conditions of the Creative CommonsDiesel powered CI engines have high part load thermo efficacy and are amply applied for power plant and automobile utilities
Was 31.3679% for Honge oil methyl ester (HOME) in the CMFIS operation, which was equal to the brake thermal efficiency (BTE) of diesel in the conventional engine
The above result had the highest nitrogenous oxides (NOx) emissions of 855.0 ppm due to the improved rate of combustion, which was much less than conventional diesel engine and, due to improved swirl and enhanced heat transfer to cylinder walls, was the main concept of this work
Summary
Introduction conditions of the Creative CommonsDiesel powered CI engines have high part load thermo efficacy and are amply applied for power plant and automobile utilities. Already stringent legislations are further updated regularly to control pollution and to avoid affecting the delicate ecosystem balance. Agarwal et al [1] showed that straight linseed oil posed operational and durability problems in the CI engine. These hindrances attribute to the polyunsaturated character of vegetable oils, i.e., they are less volatile and highly viscous. Such problems were not encountered for in linseed oil methyl ester (LOME) biodiesel due to the transesterification process, which reduces its viscosity and rules out operating and longevity hurdles
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.