Abstract
Generating surface-functional microstructures is an effective way to enhance the bonding strength of metal and carbon fiber-reinforced polymer (CFRP). In this study, different microstructural morphologies consisting of two different patterns were generated on the aluminum alloy (A7075) surface via laser processing. The experimental results indicated that different microstructural morphologies contribute to the enhancement of the shear strength of lap joints. The maximum shear strength of these joints was almost four times stronger than that of lap joints without the microstructures. In addition, the investigation indicated that the shear strength was not only determined by surface roughness and contact area but also by the arrangement of different microstructures. These results are mainly due to the combination of mechanical interlocking and physical adhesion. Finally, the corresponding mechanical models of Al-CFRP lap joints were proposed according to the bonding mechanisms and fracture behaviors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.