Optimization of machining parameters under MQL turning of Ti-6Al-4V alloy with textured tool using multi-attribute decision-making methods

Abstract

PurposeThis paper aims to focus on the application of multi-attribute decision-making methods (MADMs) to ascertain the optimal machining parameters while turning Ti-6Al-4V alloy under minimum quantity lubrication (MQL) conditions using Jatropha-curcas oil (JCO) bio-based lubricant.Design/methodology/approachThe experiments were designed and performed using Taguchi L27 design of experiments methodology. A total of 27 experiments were performed under MQL conditions using textured carbide cutting tools on which different MADMs like Analytic hierarchy process (AHP), Technique for order preference by similarity to ideal solution (TOPSIS) and Simple additive weighting (SAW) were implemented in an empirical manner to extract optimize machining parameters for turning of Ti-6Al-4V alloy under set of constrained conditions.FindingsThe results evaluated through MADMs exhibit the optimized set of machining parameters (cutting speedVc= 80 m/min, feed ratef = 0.05 mm/rev. and depth of cutap= 0.10 mm) for minimizing the average surface roughness (Ra), maximum flank wear (Vbmax), tangential cutting force (Fc) and cutting temperature (T). Further, analysis of variance (ANOVA) and traditional desirability function approach was applied and results of TOPSIS and SAW methods having optimal setting of parameters were compared as well as confirmation experiments were conducted to verify the results. A SEM analysis at lowest and highest cutting speeds was performed to investigate the tool wear patterns. At the highest speed, large cutting temperature generated, thereby resulted in chipping as well as notching and fracturing of the textured insert.Originality/valueThe research paper attempted in exploring the optimized machining parameters during turning of difficult-to-cut titanium alloy (Ti-6AL-4V) with textured carbide cutting tool under MQL environment through combined approach of MADMs techniques. Ti-6Al-4V alloy has been extensively used in important aerospace components like fuselage, hydraulic tubing, bulk head, wing spar, landing gear, as well as bio-medical applications.