Abstract
Three-dimensional elasto-plastic thermal-mechanical transient axisymmetric explicit finite element models were used to simulate the friction joining of hollow cylinder dissimilar polymeric materials PA6-PVC. The FE model takes into account the mechanical and thermal properties of PA6 and PVC as an input date. Also, the simulation analysis considered three independent variables namely, rotational speed of (500, 775, and 1200 rpm), axial displacement of (0.045, 0.09, and 0.18 mm), and total welding time of (4, 6, and 8 seconds). With respect to the FE model, the regression model is built. The minimum and maximum error percentage between FE and predicted results by regression model of welding temperature are 0.08% and 17.26% respectively. On the other hand, the error percentages of Von Mises residual stress start from 0.34% to 26.15%. The regression model is used to formulate the GA's fitness function for end welding temperature and Von Mises residual stresses. This paper showed that the GA technique is capable of estimating the optimum welding conditions that yield the value of the minimum end welding temperature and the Von Mises residual stresses relative to the results of FE and regression.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
