Optimization of Dry Machining Parameters for High-Purity Graphite in End-Milling Process

Abstract

The machining factors affecting the tool wear and surface finish produced in the end milling process are generally the cutting speed, the feed rate, the depth of cut, etc. This paper describes a study that identifies the influence of the machining parameters on the groove width and the surface roughness average for the end-milling of high-purity graphite under dry machining conditions. The experiments are based on an orthogonal arrays and grey relational analysis method is then applied to determine an optimal machining parameter setting. The dimensional accuracy of the groove width and the surface roughness average are selected as the quality targets. In this study, the feed rate is the most significant controlled factors for the machining process according to the weighted sum grade of the Δ and the R a .