Optimization of Desulfurization Process via Choline Phosphotungstate Coupled with Persulfate Using Response Surface Methodology

Abstract

Using a simple acid-base neutralization method, a Ch-PW solid catalyst was synthesized by mixing choline hydroxide (ChOH) and phosphotungstic acid (HPW) at a 2:1 molar ratio in an aqueous solution. This catalyst was combined with a 20 wt.% potassium peroxymonosulfate (PMS) solution, using acetonitrile (ACN) as the extraction solvent to create an extraction catalytic oxidative desulfurization system. The optimal desulfurization conditions were determined through response surface methodology, targeting the highest desulfurization rate: 0.99 g of Ch-PW, 1.07 g of PMS, 2.5 g of extraction solvent, at a temperature of 50.48 °C. The predicted desulfurization rate was 90.79%, compared to an experimental rate of 93.64%, with a deviation of 3.04%. A quadratic model correlating the desulfurization rate with the four conditions was developed and validated using ANOVA, which also quantified the impact of each factor on the desulfurization rate: PMS > ACN > Ch-PW > temperature. GC-MS analysis identified the main oxidation product as DBTO2, and the mechanism of desulfurization in this system was further explored.