Abstract
Microwave-assisted direct liquefaction of solid digestate was carried out in polyethylene glycol and glycerol employing sulfuric acid as catalyst, in order to convert it into a biofuel. Response Surface Methodology (RSM) coupled with Box-Behnken Design (BBD) with a total of 15 individual experiments was used to optimize the conditions of three independent variables (temperature, reaction time and solvent-to-biomass ratio) related to the bio-oil yield, the higher heating value (HHV) of bio-oil and the energy use of microwave treatment. Desirability function was employed to determine the optimal reaction conditions of the liquefaction process. The results showed that at the optimal conditions the bio-oil yield, the HHV of bio-oil and energy use were respectively 59.38%, 28.48 MJ/kg, and 115.93 Wh. The predicted responses showed a good compliance to the obtained experimental data. The optimized bio-oil was further characterized using FTIR analysis while the properties of the solid digestate and the liquefaction residue were analyzed by means of SEM analysis.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
