Abstract
In order to realize the stable clamping of large cabin parts, this paper studied the clamping force optimization of the clamping mechanism for large-mass and large-size cabin parts. Firstly, three kinds of contact models are introduced. Then, a clamping matrix is constructed for a particular clamping configuration. The nonlinear friction cone constraint at the contact point is transformed into a linear affine constraint in a smooth Riemannian manifold using the special structure of the positive definite symmetric matrix. Finally, a large cabin part used in the aerospace field is used as an example for calculating and simulating the clamping force optimization. Different optimization algorithms are used to calculate the initial value which is put into the gradient flow optimization method of the clamping force for optimization calculation. Meanwhile, the normal clamping force value of a 2 t object is measured using relevant experimental equipment. The simulation results and experimental results show that the gradient flow optimization method of the clamping force can quickly complete the clamping force optimization of large-mass and large-size cabin parts. The actual measured value of the normal clamping force is close to the simulated convergence value. The distribution of the normal force of the clamping mechanisms and the convergence value of the clamping force for each clamping mechanism can provide some references for determining the output clamping force of the clamping mechanism and confirming a reasonable distribution of the clamping mechanism. It also confirms the feasibility and effectiveness of this method applied to the clamping force optimization for a large axial part.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.