Optimal phase shift mask and multilayer stack with the evaluation of imaging performance and process latitude in extreme ultraviolet high numerical aperture

Abstract

In high numerical aperture (NA) extreme ultraviolet lithography, which is used to implement a finer linewidth of 10 nm or lower, serious problems arise in patterning as the NA increases. To alleviate such problems, a thin absorber and a multilayer with good reflective efficiency and improved pattern quality are required. To develop an effective EUV photomask for the commercialization of high-NA systems, we determined the optimal ruthenium (Ru)/silicon (Si) multilayer structure using a phase-shift mask (PSM) absorber. A Ru/Si multilayer using PSM as an absorber has a smaller best-focus range and placement error compared to the molybdenum (Mo)/silicon (Si) multilayer. At the same time, it provides improved image contrast, enabling more stable patterning. Even when the number of layers of the Ru/Si multilayer was reduced, it was confirmed that the reflectance efficiency and image quality were maintained.