Optimal medial transforaminal lumbar interbody fusion approach with five extensive options: A simulated study on three-dimensional digital reconstructed images

Abstract

ObjectiveThe objective of this study is to use 3D digital lumbar models to investigate and simulate the optimal posterior operative approach for safe decompression and insertion of an interbody cage. MethodsThirty lumbar spine (L3-S1) computed tomography data are collected for 3D reconstruction. We cut medial half part of the superior facet and define the distance between the margin of the operative side of the spinous process and the medial margin of the cut superior facet as “medial distance (MD)”. Then, we cut the total superior facet and define the distance between the margin of the operative side of the spinous process and the lateral side of the junction of the pedicle and the vertebral body as “extend distance (ED)”. The feasible insertion of the current standard width size (10 mm and 12 mm) interbody cages was assessed by the two aforementioned MD and ED approaches. Besides the ED, we also simulate four other extensive options of lateral upper, lateral lower, vertical upper and lower and transmedian contralateral decompression on 3D digital lumbar model. ResultsThe MD increased from 13.48 ± 1.28 mm at L3/4 to 18.05 ± 1.43 mm at L5/S1, and the ED increased from 16.64 ± 1.34 mm at L3/4 to 21.12 ± 1.62 mm at L5/S1. To insert a 10-mm-wide cage, 16.7% (left) and 13.3% (right) of MD for L3/4 is not enough, 60.0% (left) and 46.7% (right) of MD for L3/4 is subsafe, 13.3% (left) and 16.7% (right) of MD for L4/5 is subsafe and all others are safe. To insert a 12-mm-wide cage, 76.7% (left) and 60.0% (right) of MD for L3/4 is not enough, 20.0% (left) and 30.0% (right) of MD for L3/4 is subsafe, 13.3%% (left) and 16.7% (right) of MD for L4/5 is not enough, 63.3% (left) and 56.7% (right) of MD for L4/5 is subsafe and 6.7% (left) and 10.0% (right) of MD for L5/S1 is subsafe, whereas 33.3%% (left) and 30.0% (right) of ED for L3/4 is subsafe, 3.3% (left) and 3.3% (right) of ED for L4/5 is subsafe and all others are safe. Besides the ED, on 3D models, four other extensive options could be simulated too and may need to be performed for different special individuals. ConclusionOur 3D digital image study provides a feasible optimal medial transforaminal lumbar interbody fusion approach with five extensive options on lower lumbar region. It can provide safe lumbar decompression and interbody fusion in most population. In addition, surgeons can choose the different extensive options for special individual conditions. The translational potential of this articleTransforminal lumbar interbody fusion is very common used for lumbar degenerative diseases. The optimal medial transforminal lumbar interbody fusion with five options provide a safe and precise approach for surgeons in treatment of lumbar degenerative diseases.