Abstract
For the generation of short high power pulses in many applications, power modulators based on capacitor discharge are used, where the peak power is drawn from the input capacitor bank. In order to continuously recharge the energy buffer during operation at a lower average power, usually power supplies connected to the mains are used. Due to the worldwide variation in mains voltages and the desired ability to adapt the capacitor voltage of the modulator, the power supply has to support a wide input and output voltage range, whereby the supply should draw a sinusoidal current from the mains due to EMI regulations. Additionally, depending on the modulator concept also a galvanic isolation has to be provided. In order to achieve the mentioned specifications for the considered power supply a combination of a AC-DC and DC-DC converter is proposed, whereas the mains voltage is rectified by a three-phase buck-boost converter to 400Vdc and thereafter an isolated DC-DC converter charges the input capacitor bank of the power modulator up to 3.5 kV. This paper focuses on the basic operation and the design of the 3.5kV/11kW isolated DC-DC converter, which includes transformer design, efficiency-volume optimization and components selection. There, compared to the well-known flyback converter the proposed full-bridge based topology results in a much higher efficiency and power density.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
