Optimal configuration of passive flow control devices to reduce the aerodynamics drag of a tractor-trailer model

Abstract

Aerodynamic drag plays an important role in heavy vehicles, especially when traveling at high speeds. In this context, the application of passive flow control devices emerges as a potential approach to reduce the aerodynamic drag of vehicles, leading to improvements in fuel efficiency and environmental pollution. Consequently, this study focuses on using cab side extenders and rear flaps to reduce the aerodynamic drag of a 1:8 small-scale simplified tractor-trailer model. The main parameters of this device configuration, including the length LR and deflection angle θG of the cab side extenders, the length LR and deflection angle θR of the rear flaps, are optimized to minimize the model aerodynamic drag coefficient. Numerical studies are performed using the Computational Fluid Dynamics method, with the steady k-ω SST and the unsteady DES turbulence model. The optimal solution is implemented based on a 30-level Latin Hypercube design of the experiment and a full quadratic regression response surface method. The obtained results show that a maximum reduction in the aerodynamic drag coefficient of the simplified tractor-trailer model by 20.8 % is achieved with an optimized configuration of control devices. The mechanism of aerodynamic drag reduction is also evaluated based on the analysis of flow fields around the vehicle model.