Abstract
A method for building an optical-to-microwave frequency chain and for measuring optical frequencies relative to the cesium primary frequency standard is described. Based on optical frequency division via parametric oscillators, the concept is to generate two known ratios (1/2 and 4/9) of an optical calibration frequencyf1 whose frequency difference is measured relative to the cesium clock. The (1/2) ratio is obtained by either a 2:1 frequency division off1 or second-harmonic generation of (l/2)f1. The (4/9) ratio off1 can be generated with a 3:1 frequency divider driven by a second laser atf2 that is chosen to be near (2/3)f1, which in turn is obtained with af1-pumped 3:1 frequency divider. A set of auxiliary Optical Parametric Oscillators (OPOs) with outputs centered at (1/2)f1 is used to facilitate the difference-frequency measurement between the two ratios. A practical configuration utilizing a YAG and a Ti: Al2O3 laser and its application to a number of precision measurements of interest are presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.