Optical quality comparison between 2 collagen copolymer posterior chamber phakic intraocular lens designs

Abstract

To compare the optical quality in vitro of 2 designs of the Visian Implantable Collamer Lens phakic intraocular lens (pIOL) for different powers and optical apertures. University of Valencia, Valencia, Spain. Experimental study. The Nimo TR1504 deflectometry device was used to measure the V4c pIOL, which has a smaller optic diameter, and the V5 pIOL, which has a larger optic diameter. The pIOLs were measured for -3.00 diopters (D), -6.00 D, -9.50 D, and -10.50 D at different optical apertures from 3.00 to 6.00 mm depending on the IOL power and model. The root mean square of higher-order aberrations (RMS HOAs) was analyzed. The Strehl ratio, point-spread functions (PSFs), and simulated images were calculated from wavefront aberrations. There were no statistically significant differences in any Zernike RMS or RMS HOAs between the 2 pIOL models with the same power and optical aperture (P > .05). Both pIOLs had negative spherical aberration that increased with the pIOL power. Strehl ratio values showed no statistically significant differences between the pIOLs with the same power and pupil aperture. Minimal differences were seen in the PSFs and simulated images between the pIOLs. Both pIOLs showed good and comparable in vitro optical quality similar that of a perfect lens in that they should not affect visual performance after implantation. Patients with larger pupil diameters could benefit from the pIOL with the larger optic diameter because it showed better in vitro optical quality than the previous design with a smaller optic diameter. No author has a financial or proprietary interest in any material or method mentioned.