Abstract
The planar waveguide, to our knowledge, has been firstly fabricated in the Yb3+-doped silicate glass by 6.0MeV O3+ ion implantation at a dose of 6×1014ions/cm2. The guiding properties are characterized by the prism-coupling and end-face coupling methods with a He–Ne beam. The dark-mode spectra and near-field intensity distribution are measured before and after annealing at 250°C for 1h in air. The results indicate that the thermal treatment can enhance the propagation properties with preserving the effective refractive indices well. The refractive index profile of the planar waveguide is reconstructed by the reflectivity calculation method, which shows a typical “enhanced well+optical barrier” distribution. The SRIM’2006 code is carried out to simulate the energy loss during the implantation in order to obtain a better understanding of the waveguide formation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Optik - International Journal for Light and Electron Optics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
