Optical properties of low molecular weight and colloidal organic matter: Application of the ultrafiltration permeation model to DOM absorption and fluorescence

Abstract

Cross-flow ultrafiltration (CFF) is often used to obtain separation and concentration of colloids from bulk natural water samples. Application of the ultrafiltration permeation model allows the quantitative determination of the low molecular weight material (LMW, < 1 kDa) and colloids in bulk dissolved organic matter (DOM) from measurements of time series permeate samples obtained from CFF. Detailed analysis of a Yukon River water sample shows that DOM absorption coefficient and fluorescence follow the permeation model and that the complex spectral optical properties of LMW DOM can be reconstructed from CFF data. A combination of measured and modeled data indicates that the LMW contribution to bulk DOM optical properties obtained from CFF can be grossly underestimated by the use of a low concentration factor (CF, the ratio of initial sample volume to retentate volume). Even at a relatively high CF of 19, optical properties of LMW DOM calculated from measurements of the retentate or integrated permeate would underestimate true values by 5–36%. In the Yukon River sample, LMW dissolved organic carbon represented 26% of the bulk concentration, but only 3–14% of the colored DOM was in the LMW fraction while 31–33% of bulk DOM florescence was due to LMW DOM. The contrasting optical properties of LMW and colloidal DOM support the concept that analysis of bulk DOM absorption and fluorescence properties reveals information about DOM molecular weight.