Abstract
Reflected light optical analysis and Electron Backscatter Diffraction (EBSD) analysis have been used to m easure grain sizes in 2D Al foil samples, annealed for different times. There are significant differences in the results of the two techniques. It is shown that in Al it is possible to detect boundaries in optical images down to a misorientation angle of 7-8º. Nevertheless, in most samples the critical angle of easy etching lies above 10º. The observed differences in grain size measurements between optical analysis and EBSD analysis can be largely attributed to three phenomena: (1) individual samples may behave slighty differently due to differences in the effectiveness of etching (2) the grain size is heterogeneous over large areas and (3) the effect of etching is not only a function of misorientation angle but also grain boundary plane. Despite these uncertainties, optical analysis seems to be reliable for analysis of processes in which mainly grain boundaries with misorientation angle of > 10º are involved i.e. grain growth.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
