Abstract
A direct ultraviolet (UV)-assisted nanoimprinting procedure using photosensitive titanium di-n-butoxide bis(2-ethylhexanoate) is employed in this study for the nanopatterning of anatase titanium dioxide (TiO 2) structure. Upon annealing at 400 °C for 1 h, the lateral shrinkage and thickness shrinkage of the TiO 2 nanostructure were 39.6% and 52.5%, respectively, which indicated an anisotropic volume loss. During UV irradiation and annealing treatment, the refractive index of UV-irradiated TiO 2 film is gradually increased by improvement in the packing density and crystallinity of the film. According to increasing UV exposure time and annealing temperature, the optical band gap ( E g) of UV-irradiated TiO 2 film is red-shifted from 3.73 to 3.33 eV due to the formation of lattice defects, vacancies and voids during the photochemical reaction and due to the effect of quantum confinement during annealing treatment. These results suggest that the refractive index and optical E g of TiO 2 nanostructure could be controlled by tuning the UV exposure time and annealing treatment conditions. Nanopatterns of TiO 2 fabricated by direct UV-assisted nanoimprint lithography are potential candidates for use in protective coatings for optical mirrors and filters, high-reflectivity mirrors, broadband interference filters and active electro-optical devices where ordered surface nanostructures could be necessary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.