Abstract
In this work, a-C:H:Si (DLC-Si) films were produced onto polycarbonate substrates by the rf-PACVD technique from gaseous mixtures of CH 4+SiH 4 and C 2H 2+SiH 4. The effects of self-bias and gas composition upon mechanical and optical properties of the films were investigated. Films deposited at low self-bias voltages showed large optical gaps, decreasing for increasing bias. Addition of silane to the discharge gas was observed to further increase the optical gap. High scratch hardness values were obtained at intermediate values of self-bias for both the films deposited from CH 4+SiH 4 and C 2H 2+SiH 4. The addition of silane induced a minor decrease in scratch hardness values. No direct correlation of scratch hardness was found with the microhardness or residual stress of the coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
