Abstract

Indium oxide (In2O3) based thin films have attracted much attention due to their high transparency and low resistivity. In order to obtain good transmittance and high conductivity, niobium (Nb) element was chosen as dopant in In2O3 in this study. Nb-doped In2O3 thin films (InNbO) were deposited on substrate by co-sputtering technique. The influence of Nb content on the structural, optical and electrical properties of InNbO thin films was systematically investigated. These thin films are compact and uniform without obvious pores and cracks. And InNbO is cubic bixbyite structure similar to In2O3. When Nb content is 1.8 at%, the resistivity of InNbO is as low as 8.29 × 10−3 Ω·cm. The prepared thin films exhibit high optical transmittance from visible to near-infrared wavelength regions. The average transmittance of InNbO thin films can reach 80.74 % in visible light range (380 ∼ 750 nm), and 75.71 % in near-infrared region (750 ∼ 2400 nm).

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call