Abstract

Vanadium-doped ZnO (VZO) transparent conductive films have been prepared by radio frequency magnetron sputtering with a ceramic target (99wt.% ZnO, 1wt.% V2O5) in different Ar and H2 atmospheric conditions at room temperature. The influence of H2 flow rates on the structural, morphological, electrical and optical properties of the VZO film were systematically investigated. The results indicate that H2 flow rate considerably influenced the above-mentioned properties of VZO films. Incorporation of an optimum amount H during the VZO film deposition process dramatically improved the crystallinity, average particle size, conductivity, and transmittance of the VZO films. H and V co-doped ZnO (HVZO) films with optimal electrical and optical properties, a resistivity of 9.26×10−4Ωcm and an average transmittance of about 85% (from 400 to 1200nm), were obtained at a H2 flow rate of 1.8sccm.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call