Abstract
ABSTRACT A version improving the efficiency of the Trombe-type assembly is proposed in this study. It consists in equipping the wall with a series of inclined fins forming open cavities of parallelogram section affecting the aerodynamics of the active cavity. The natural convective flow leads to an increase in natural convective heat transfer and improves the overall performance of the assembly. The experimental study is performed with a 0.2 scale assembly. The wall generates a heat flux in a wide range corresponding to the solar radiation while the glass cover is maintained isothermal at cold temperature. The distance between the hot and cold walls compared to the height of the cavity leads to three aspect ratio values (0.1, 0.2 and 0.3). The study performed for a Rayleigh number ranging from 2.81 × 108 to 4.14 × 109 confirms the effectiveness of the new version proposed in this work. With the finned wall, the average natural convective heat transfer increases from 7 to 23% compared to the conventional version without fins, according to the considered configuration. The average Nusselt number is determined for all the tested configurations with a maximum uncertainty of 5%, taking into account the uncertainties of the measured physical parameters. A Nusselt-Rayleigh type correlation is proposed, obtained by means of the least squares optimization method.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
