Abstract
In the process of volumetric fracturing of shale oil, physical property changes caused by stress changes will affect the recovery, so it is urgent to conduct an analysis and evaluation of physical property changes caused by stress changes. In this research, a physical simulation experiment with constant confining pressure and variable pore pressure combined with an online nuclear magnetic resonance (NMR) technique was constructed. The results show that the increased range of the macropore (IRM) and the total pore (IRT) of matrix samples is 11.70~13.24% and 10.54~14.27% with the increase of pore pressure, respectively. That of fractured samples are 7.94~8.48% and 9.21~10.51%. It indicates that increasing pore pressure is more effective for matrix reservoirs. The decreased range of the macropore (DRM) and the total pore (DRT) of matrix samples is 10.29~13.89% and 10.38~21.24% with the unloading of pore pressure, respectively. That of fractured samples are 8.49~9.66% and 10.91~11.10%. It indicates that unloading pressure has less influence on fractured reservoirs. The increased range of permeability of matrix rock samples is 99~120% with the increase of pore pressure. Greatly supplementing formation energy is an effective means to improve the permeability of matrix reservoirs. Compared with matrix reservoirs, unloading pore pressure is more damaging to fractured reservoirs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
