Abstract
The reactive power absorption of conventional line commutated converter–high-voltage direct current transmission systems challenges on the voltage stability of AC/DC power systems. Many online dynamic voltage stability assessment approaches have been put forward to AC power systems, but the impact of DC transmissions is seldom taken into account for AC/DC power systems. In this study, an online dynamic voltage stability assessment method of AC/DC power systems is proposed. The proposed method models the converter as an equivalent AC voltage source in series with the internal impedance by utilising the control mode model of DC transmission systems and the measured data of the converter bus. The equivalent AC voltage source can identify the dynamic of DC transmissions. Then the AC/DC power system can be modelled by the equivalent AC power system. Based on the nodal equivalent method, the proposed method establishes a voltage stability index of the equivalent AC power systems for the dynamic voltage stability assessment of AC/DC power systems. The simulation demonstrated the effectiveness of the proposed method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.