One-step rapid prototyping of recyclable ultrathin CNF/MWCNT/Fe-based spinel oxide asymmetric interdigital nanopaper electrodes for high performance flexible supercapacitors

Abstract

Flexible asymmetric supercapacitors (FASCs) are potential energy storage devices for wearable electronics, considering that these have a wide operating voltage window, high specific capacity, and high energy density. However, achieving high energy density through the optimization of structure and electrode remains a challenge. Herein, two electrode inks with exceptional homogeneity nature and stability are prepared by using in-situ grown Fe-based spinel oxide (MFe2O4 = Fe3O4/MnFe2O4) on multi-walled carbon nanotubes (MWCNT) combined with eco-friendly and renewable cellulose nanofiber (CNF). Meanwhile, ultrathin flexible asymmetric interdigital nanopaper electrodes (NFT@MnFe and NFT@Fe) with customized patterns are fabricated through a one-step mask-assisted vacuum filtration strategy by using the obtained electrode inks. The planar interdigital FASC device based on the NFT@MnFe cathode and the NFT@Fe anode has excellent area specific capacity (309.8 mF cm−2), energy density (110.2 μW h cm−2), and power density (0.47 mW cm−2). The FASC maintain over 95 % of the original capacity after 5000 charge/discharge cycles. Noteworthy, a stacked interdigital FASC can be achieved with an energy density of up to 273.8 μW h cm−2 at 0.47 mW cm−2 power density, combining the structural benefits of planar interdigital and sandwich-type devices.