Abstract
Lithium-ion battery (LIB) technology is state-of-the-art energy storage technology for portable electronics and electric vehicles (EVs). In this incumbent LIB technology, lithium hexafluorophosphate (LiPF6) is the most widely used electrolyte salt to date. However, the challenges related to its chemical/thermal stability, sensitivity to moisture and the consequent formation of strong acids such as hydrogen fluoride (HF) need to be resolved with alternative salts. Due to its better chemical/thermal stability, resistance to moisture and HF formation, and better ionic conductivity, lithium bis(fluorosulfonyl)imide (LiFSI) has been considered as a promising alternative electrolyte salt to LiPF6. In this study, the effect of addition of 1000 ppm water on LiFSI based electrolytes was systematically investigated by testing NMC622/lithium and artificial graphite/lithium half and NMC622/graphite full cells in four LiFSI based electrolytes; plain LiFSI, LiFSI + 1000 ppm H2O, LiFSI + 10 wt% FEC, and LiFSI + 1000 ppm H2O + 10 wt% FEC. Post mortem characterization of selected electrodes was also conducted with SEM imaging and XPS to study the surface chemistry and morphology of cycled electrodes. Overall, this study shows that 1000 ppm water can slightly improve the electrochemical performance of NMC622/lithium half cells; however, the same amount of moisture severly degrades the graphite half and NMC622/graphite full cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
