On the hygrothermal properties of sandcrete blocks produced with sawdust as partial replacement of sand

Abstract

Abstract In Nigeria, sawdust is continuously generated in large quantities as waste but majorly under-utilised, a situation which causes serious environmental problems and health hazards when managed improperly. This work focussed on production and assessment of hygrothermal properties of solid core sandcrete blocks in which sand is partially replaced with sawdust at 0%, 10%, 20%, 30%, and 40% loading levels. Experiments were conducted on block samples made with untreated sawdust (USD) and on those similarly produced but with treated sawdust (TSD). The results showed that the blocks with USD content are capable of decreasing wall heat transmission load and improve energy efficiency of building envelopes better than their counterparts produced with TSD. In terms of compliance with standard bulk density and water absorption requirements, incorporation of USD or TSD at 20% or 10% level respectively, was found to be optimum for partial sand substitution in the studied block samples in order to suit the functional requirements of building structure and interior space. Since sawdust is cheaply and commonly available in vast amount, utilising it in sandcrete block production is a promising way of minimising its disposal problems while enhancing the development of safe, affordable, and sustainable housing.