On the failure behaviour to striking bow penetration of impacted marine-steel structures

Abstract

Abstract Demands for water transportation modes are continuously increasing as rapid economic and industrial growths in the recent decade. Ship as representative of the water transportation is generally needed to carry various products from one location to another. Besides as product carrier, ship also acts as public facility to transport human across islands for number of reasons, such as tourism and vehicle. Considering its importance, structural damage due to accidental loads or so-called impact can cause unacceptable casualties which threat ship passenger, shipping industry and maritime environment in same time. The most frequent impact phenomena occur in forms of collision and grounding, which are targeting side structure and double bottom consecutively. However, since responses of the impacts on structure are highly nonlinear and vary due to development of ship structures, sustainable analysis as an update of pioneer calculation can be beneficial as rational reference for improving safety and navigational instruments. This work aims to assess failures of the side structures subjected to penetration of striking bow in ship-ship collision scenario. Locations of impact are idealized to happen on after-end, midsection and fore-end to provide complete assessment. Striking bow is to be deployed by varying input velocity to observe significance of the fractures on the side structure. This configuration is implemented on the designed collision scenario, and later calculated using nonlinear finite element method (NLFEM). Summary of the solution indicated that the midsection produced the highest resistance against side collision. Breaching of the inner shell was successfully avoided on the fore-end, but the critical damage to the cargo was observed during bow penetration to the after-end region. This location was recommended to be added by longitudinal framing to increase its resistance against ship collision.